IMG_9988-2
  • Quantum Technology
  • Laser cooling & Trapping
  • Biophotonics & Microscopy
  • Spectroscopy & Imaging
  • PIV/LIBS
  • Frequency Combs

Our company supports scientific research giving to researchers the required technical support and offering them the products they really need such as laser sources in different laser technologies (Solid State, Semiconductor, Gaz, Fiber, Dye, QCL) , laser instrumentation, detection and imaging devices and laser accessories and covering the fields of fundamental and practical research in physics, chemistry, engineering, optical communications and life-sciences studies.

Related Products

AOKit Bio – Build any AO system for microscopy

 Johanna Taieb

RECOMMENDED FOR
– Wide field
– Confocal
– Multiphoton
– Light sheet
– STED and SIM microscopy, as well as FCS or optical tweezers

KEY FEATURES
– HASO4 First or HASO4 SWIR
– MicAO soft
– Wavekit SDK
– MirAO 52e/52es or any compatible DM or phase modulator

AOKit Bio: Adaptive Optics Kit for Microscopy

 Miki Iluz
Advantages of AOKit Bio:
  • Choose your elements depending on your needs : AO loop can be integrated with different phase modulators, such as deformable mirrors or spatial light modulators (SLM)
  • Doubles the number of detected photons
  • Operate in both closed and open loop mode
  • Save time implementing your AO set-up

Compact Fizeau wavemeter FZW600

 Miki Iluz

Key Features

  • Absolute accuracy 600MHz
  • Measurement precision 50MHz
  • Up to 250 measurements/s
  • Operation over 400-1100nm without recalibration
  • Rapid on-device measurement, no host computer required!
  • Integrated PID controller for wavelength stabilisation
  • Interactive display for control and diagnostics
  • Ethernet and USB interfaces
  • Compact form-factor, 146 x 120 x 81 mm

Compact motorized laser beam expanders MEX

 Michael ILUZ

Main features: 

  • Highest beam pointing stability (< 0,1 mrad)
  • All-in-one design with integrated controller
  • Two lenses simultaneous movement assuring no misfocus
  • Absolute encoder (both lenses)
  • Adjustment time <1s (all magnifications)
  • Fused silica optical elements
  • No homing after switching on/off
  • Diffraction limited performance for all magnifications

Application examples: 

  • Precise laser micromachining
  • Life sciences
  • Research

 

Fast servo controller FSC100

 Michael Iluz

Key Features:

  • High-bandwidth PID or PI²D control
  • All-analogue signal processing with propagation delay 40ns
  • Parallel FAST and SLOW control loops
    • Feedback to both current and piezo
    • Flexible control of loop parameters
  • High-bandwidth external modulation
  • Internal ramp generator
  • Two low-noise photodiode power supplies
  • TTL control

Fixed ratio laser beam expanders FEX

 Michael ILUZ

Main features:

  • Divergence adjustment
  • Galilean optical design
  • UVFS optical elements
  • Grease free mechanical design
  • Wide wavelenght adoption – 200 nm to 2 μm

 

Application examples:

  • Laser materials processing
  • Medical
  • Research

 

 

High-power motorized beam expanders MEX-HP

 Michael ILUZ

Main features: 

  • High power optical design (up to 200 W @ 1030 nm, 500 fs, 1 Mhz)
  • No internal reflections on optical elements
  • High beam pointing stability <0,2 mrad
  • All-in-one design with integrated controller
  • Two lens simultaneous movement assuring no misfocus
  • Absolute encoder (both lenses)
  • Fused silica optical elements
  • Diffraction limited performance for all magnifications

Application examples: 

  • Precise laser micromachining
  • High power laser beam management
  • Research

 

MENHIR-1550 SERIES

 Michael Iluz

Key Features:

  • Ultra-low noise
  • Transform-limited pulses
  • Compact industrial design
  • Harsh environment resistant
  • User friendly
  • Turnkey system
  • 24/7 operation
  • All-in-one system

MicAO 3DSR – High Resolution 3D for SMLM

 Johanna Taieb

BEST FOR
– Photoactivation localization microscopy (PALM)
– Stochastic optical reconstruction microscopy (STORM)
– Single particle tracking (SPT)

KEY FEATURES
– Corrects aberrations and restores diffraction-limited PSF
– Delivers best 2D and 3D localization precision for PALM/STORM imaging
– Doubles the number of detected photons and improves localization precision
– High temporal stability of the correction

MicAO: Adaptive Optics add-on module for SMLM

 Miki Iluz

Features:

  • Restores Point Spread Function (PSF) symmetry
  • Doubles the number of detected photons
  • Improves near diffraction-limited resolution
  • Allows you to create a perfect PSF ecoding astigmatism or tetrapod to go 3D
  • Gives you a better 2D and 3D localization precision
  • Is compatible with long-term imaging

Mirao 52e – Optimized for closed-loop operations Copy

 Johanna Taieb

BEST FOR
– Bio-imaging
– Ophthalmology
– Microscopy
– Beam shaping

KEY SPECS
– ±50 µm stroke (tilt p/v)
– 15 mm pupil with 52 actuators
– Exceptional surface quality (less than 10 nm rms active flat)
– Virtually no hysteresis (less than 2%)
– Near perfect linearity (over 95%)
– Compatible with open-loop control
– USB2 connectivity

Mirao 52es – For long-term wavefront stability

 Johanna Taieb

KEY SPECS
– ±50 µm stroke (tilt p/v)
– 15 mm pupil with 52 actuators
– Exceptional surface quality (<10 nm rms active flat)
– Virtually no hysteresis (<2%) – Near perfect linearity (>95%)
– Compatible with open-loop control
– USB2 connectivity
– Ultra-high temporal stability

mu-DM: Deformable mirror for microscopy & ophthalmology

 Miki Iluz

Features of µDM deformable mirror for microscopy

  • Fast closed-loop convergence and accurate sensorless correction with perfect linearity and absence of hysteresis
  • Preserved photon budget with achromatic, highly reflective and continuous membrane
  • Long-term stability with temporal drift automatic compensation
  • Large dynamic range with 50% of actuators stroke still available while generating 40 microns PtV of focus
  • Fine timing control with trigger-in and trigger-out features
  • Easy integration with electronics embedded in a single-piece design and connection via a USB3 cable
  • Correction up to 10th Zernike order thanks to optimized actuator layout

QCW mini-stacked array

 Bernard Azout

Key Features:

  • High power density (500 to 1000 W QCW out of 3×3 mm² – 1200 to 2400 W QCW out of 5×5 mm²)
  • Highly compact design
  • Square emission area
  • Wavelength: 795–830 nm, 880 nm et 9xx nm
  • Options for multi-color emission
  • Collimation on request
  • High operating temperature range
  • Collimation on request
  • Mechanically robust, shock and vibration resistant

Supercontinuum SC-5

 Michael Iluz

Key Features:

  • >500mW Total Power
  • Wavelength  470nm-2400nm
  • Spectrum Power Density >-10dBm/nm
  • Spectrum Stability <0.1dB
  • Bluetooth Connection
  • Single mode fiber with FC connector

Supercontinuum source SC-PRO

 Michael Iluz

Key Features:

  • Total power: ＞8W （10-20W Optional）
  • Internal Repetition Rate: 0.1-200MHz
  • External Triggerable: 1-80MHz
  • Wavelength: 400nm-2400nm
  • Pulse Energy: >1uJ
  • Single-Mode Output
  • NIM trigger signal output, externally triggerable

Tangor 300

 Bernard Azout

Key Features:

  • Real Pulse on Demand with FemtoTrig™
  • Higher Throughput with GHz Burst™
  • IR, Green and UV Outputs
  • Industrial Design for 24/7 Operations

Tunable Littrow Lasers (LDL)

 Michael Iluz

Key Features:

  • Vibrationally inert
  • Passive stability
  • Wide tuning range
  • Decoupled grating rotation and tilt
  • Wide mode-hop free scan range
  • Narrow linewidth
  • Fast piezo feedback
  • Precision alignment controls
  • High bandwidth low latency modulation
  • Diode protection circuit and relay
  • Low frequency noise

ULTRA HIGH ENERGY PULSED LASERS

 Miki Iluz

Key Features:

  • Up to 10J at 1064nm
  • Up to 5J at 532nm
  • Telescopic or Super-Gaussian coupled resonators
  • Birefringence compensation
  • Rugged industrial build
  • Optional seeder package
  • 3rd and 4th harmonics available
  • Full RS232 software control and LabVIEW™ drivers

Ultrafast shutters

 Michael ILUZ

Main features: 

  • Custom wavelength available from UV to IR
  • Ultrafast switching time (opened-opened) 500 μs
  • Switching frequency range 0-500 Hz
  • Laser power up to 200W
  • Laser beam polarization independent
  • Compact vertical design
  • Compatable with femtosecond lasers

Application examples: 

  • Laser cutting
  • Engraving
  • Laser surgery systems
  • Research

Variable beam expanders VEX and reducers VRE

 Michael ILUZ

Main features:

  • Highest beam pointing stability (<0,5 mrad)
  • Fused silica optical elements
  • Grease free mechanical design
  • Sliding lens design
  • Diffraction limited performance for all magnifications

 

Application examples:

  • Laser micromachining
  • Research

WAVETUNE – Perfect loop control for imperfect wavefronts

 Johanna Taieb

RECOMMENDED APPLICATIONS
– Free-space communication
– Astronomy
– Microscopy
– Ophthalmology
– Ultra-intense lasers

KEY FEATURES

– Modal Wavefront Analysis + Intensity Analysis
– Wavefront Correction Diagnosis + Influence Matrix Analysis + AO Control
– System Integrate using either C/C++, Python or Labview SDK
– Several hundred available functions
– Dozens of examples