Showing 1–16 of 18 results

BeamPro

 Michael Iluz

Key Features:

  • Compact design
  • User-friendly and powerful software
  • High resolution (up to 24 Mpx)
  • Small pixel size (down to 1.67 µm)
  • Large sensor size (up to 25 mm)
  • C-mount

 

FAST FROG

 Michael Iluz

Key Features:

  • Easy to use: no calibration and no tweaking necessary
  • User-friendly and powerful software
  • Can access Spatio-Temporal couplings (Spatial Chirp, Pulse Front Tilt)
  • Versatile: instant-swap of spectrometer for different wavelength ranges
  • Single-pulse extraction possible up to 150 kHz laser repetition rate (with Enhanced
    detection option)
  • Achromatic and non-dispersive (FC and FS models)
  • Sub-5 fs can be measured

HF2LI – 50 MHz Lock-in Amplifier

 Michael Iluz

Key Features:

  • DC – 50 MHz, 210 MSa/s
  • 2 independent lock-in units, 2 signal generators
  • 1 fundamental and 2 harmonics per lock-in unit
  • 4 auxiliary outputs, 2 auxiliary inputs
  • USB 2.0, 480 Mbit/s
  • LabOne® toolset including Scope, Sweeper, and Spectrum Analyzer

HF2PLL – Phase-Locked Loop

 Michael Iluz

Key Features:

  • Dual 50 MHz PLL
  • 2 fully configurable lock-in amplifiers
  • 2 high-frequency, high-performance signal generators
  • 50 kHz PLL bandwidth with full parameter control
  • 4 fully configurable PID controllers
  • PLL harmonic mode
  • Frequency deviation and dissipation output (jitter-free)

MFLI – 500 kHz / 5 MHz Lock-in Amplifier

 Michael Iluz

Key Features:

  • DC – 500 kHz, 60 MSa/s, 16 bits
  • Optional upgrade to 5 MHz
  • Current and differential voltage inputs
  • AC line and DC supply (battery) operation
  • USB 2.0 and 1 GbE high-speed connections
  • Plug & Play with embedded LabOne® Web Server
  • LabOne toolset including Scope, Sweeper, and Spectrum Analyzer

MISS SPECTROMETER

 Michael Iluz

Key Features:

  • Compact design
  • Horizontal and vertical spatial chirp measurement
  • User-friendly and powerful software (STAR : Software Technology for Acquisition and retrieval)
  • High spatial and spectral resolution
  • Different models from 240 to 1100 nm
  • Input beam diameter up to 12.7 mm
  • Single shot capable up to 75 kHz, synchronization options available
  • Fiber input compatible

 

MS-FROG

 Michael Iluz

Key Features:

  • User-friendly: no calibration and no tweaking necessary
  • Versatile: instant-swap of spectrometer for different wavelength ranges
  • Large pulse duration measurement range (from 5 fs to 80 ps)
  • High sensitivity (sub-nJ pulse)
  • User-friendly and powerful software (STAR : Software Technology for Acquisition and Retrieval)
  • Broad available spectral range
  • Fiber connector available (FC/APC, FC/PC)

NANO4TH FREQUENCY CONVERTER

 Michael Iluz

Key Features:

  • Ultra compact, industrial-grade platform : sealed, nitrogen purged
  • High conversion efficiency of low-energy pulses (nJ level)
  • Wavelength change from 3 outputs, within seconds : fundamental, 2nd and 4th harmonics
  • All-in-one design. Laser and conversion unit are combined into one single robust assembly
  • Alignment free. No software needed

 

PQSC – Programmable Quantum System Controller

 Michael Iluz

Key Features:

  • Control of up to 100 qubits
  • Synchronization of up to 18 HDAWGs, i.e., 144 output channels
  • < 100 ns communication latency
  • Customization through user access to FPGA Xilinx® UltraScale+ XCZU15EG-2I
  • LabOne® control software and APIs for Python, C, MATLAB®, LabVIEW™ and .NET

ROC Single-Shot Autocorrelator

 Michael Iluz

Key Features:

  • Ultra simple alignment (2 min to setup)
  • Large pulse duration measurement range (from 5 fs to 80 ps)
  • High sensitivity (sub-nJ pulse)
  • User-friendly and powerful software (STAR : Software Technology for Acquisition and retrieval)
  • Broad available spectral range
  • Fiber connector available (FC/APC, FC/PC)

ROC Single-Shot Autocorrelator

 Michael Iluz

Key Features:

  • Ultra compact
  • Installation and measurement in less than 2 minutes! No calibration necessary
  • Suitable for any repetition rate
  • Single-pulse extraction possible up to 150 kHz laser repetition rate (with Enhanced detection option)
  • User-friendly and powerful software (STAR : Software Technology for Acquisition and Retrieval)
  • Input pulse energy from few pJ to few mJ
  • Acceptable average power up to 3.5 W
  • Pulse measurement from 5 fs to 10 ps
  • Broad available spectral range

 

SHFQA – 8.5 GHz Quantum Analyzer

 Michael Iluz

Key Features:

  • 600 MHz operation frequency
  • 2 independent lock-in units
  • 4 independent harmonics per lock-in unit
  • 2 high-performance signal generators
  • 2 boxcar units
  • 2 periodic waveform analyzers
  • Baseline suppression
  • Zero acquisition dead time

UHFAWG – 600 MHz Arbitrary Waveform Generator

 Michael Iluz

Key Features:

  • Dual 600 MHz arbitrary waveform generator
  • 14-bit resolution, 2 markers per channel, 1.8 GSa/s
  • 128 MSa waveform memory per channel
  • Amplitude modulation with internal and external phase reference
  • Two 600 MHz signal inputs with oscilloscope and optional detection schemes
  • Cross-trigger engine for low-latency triggering and sequence branching

UHFBOX – 600 MHz Boxcar Averager

 Michael Iluz

Key Features:

  • 600 MHz operation frequency
  • 2 independent lock-in units
  • 4 independent harmonics per lock-in unit
  • 2 high-performance signal generators
  • 2 boxcar units
  • 2 periodic waveform analyzers
  • Baseline suppression
  • Zero acquisition dead time

UHFLI – 600 MHz Lock-in Amplifier

 Michael Iluz

Key Features:

Key Features

  • 600 MHz operation frequency
  • 2 independent lock-in units
  • 2 high-performance signal generators
  • 4 independent harmonics per lock-in unit
  • High-resolution 12-bit scope with 65k samples
  • Frequency Response Analyzer (FRA)
  • FFT Spectrum Analyzer
  • LabOne® toolset