Showing 33–48 of 51 results
Miki Iluz
Advantages of Mirao:
- Closed-loop precision reaching 7nm RMS
- Virtually no hysteresis (less than 2%)
- Nearly perfect linearity (more than 95%)
- Dust proof & high stabilization options available
Miki Iluz
Features of µDM deformable mirror for microscopy
- Fast closed-loop convergence and accurate sensorless correction with perfect linearity and absence of hysteresis
- Preserved photon budget with achromatic, highly reflective and continuous membrane
- Long-term stability with temporal drift automatic compensation
- Large dynamic range with 50% of actuators stroke still available while generating 40 microns PtV of focus
- Fine timing control with trigger-in and trigger-out features
- Easy integration with electronics embedded in a single-piece design and connection via a USB3 cable
- Correction up to 10th Zernike order thanks to optimized actuator layout
Johanna Taieb
Key Features:
- 1064.3 +- 0.1 nm
- 7ps
- spectral width <0.3nm
- 40MHz
- air-cooled and liquid-cooled version
Bernard Azout
Key Features:
- High power density (500 to 1000 W QCW out of 3×3 mm² – 1200 to 2400 W QCW out of 5×5 mm²)
- Highly compact design
- Square emission area
- Wavelength: 795–830 nm, 880 nm et 9xx nm
- Options for multi-color emission
- Collimation on request
- High operating temperature range
- Collimation on request
- Mechanically robust, shock and vibration resistant
Bernard Azout
Key Features:
- Air-cooled up to 20 W
- FemtoBurst™
- SuperSync Control
- Optional green, UV and DUV outputs
- Industrial design for 24/7 operation
Bernard Azout
Key Features:
- Up to four simultaneous wavelengths
- Femtosecond pulses for maximum precision and minimal HAZ
- Fully customizable
Michael Iluz
Key Features:
- Wavelength: 410nm-2400nm
- Total power: 7W
- Repetition Rate: 80MHz
- Seed source pulse duration: ~6ps
- Single-Mode Output
Michael Iluz
Key Features:
- >500mW Total Power
- Wavelength 470nm-2400nm
- Spectrum Power Density >-10dBm/nm
- Spectrum Stability <0.1dB
- Bluetooth Connection
- Single mode fiber with FC connector
Michael Iluz
Key Features:
- Total power: ＞8W （10-20W Optional）
- Internal Repetition Rate: 0.1-200MHz
- External Triggerable: 1-80MHz
- Wavelength: 400nm-2400nm
- Pulse Energy: >1uJ
- Single-Mode Output
- NIM trigger signal output, externally triggerable
Bernard Azout
Key Features:
- Short Pulse option < 150 fs
- FemtoBurst™
- Trigger on demand – FemtoTrigTM
- SuperSync Control
- Frequency conversion from Soft X-ray to THz
Bernard Azout
Key Features:
- Real Pulse on Demand with FemtoTrig™
- Higher Throughput with GHz Burst™
- IR, Green and UV Outputs
- Industrial Design for 24/7 Operations
INFO
Key Features:
- Fiber lasers
- Power: 100 W – 2000 W
- High degree of laser safety & maintenance free operation
- Air or water cooled
- Wavelength: 1071±2 nm – 1075±2 nm
Source: TRUMPF Group
INFO
Key Features:
- Pulsed fiber lasers
- PulseTune technology
- Up to 48 selectable waveforms
- Industry leading reliability & maintenance free operation
- Wavelength: 1050 nm – 1067 nm
- Frequency: 1 kHz – 4000 kHz
- Pulse duration: 3 ns – 2000 ns (depending on model)
Source: TRUMPF Group
Michael Iluz
Key Features:
- Vibrationally inert
- Passive stability
- Wide tuning range
- Decoupled grating rotation and tilt
- Wide mode-hop free scan range
- Narrow linewidth
- Fast piezo feedback
- Precision alignment controls
- High bandwidth low latency modulation
- Diode protection circuit and relay
- Low frequency noise
Miki Iluz
Key Features:
- Up to 10J at 1064nm
- Up to 5J at 532nm
- Telescopic or Super-Gaussian coupled resonators
- Birefringence compensation
- Rugged industrial build
- Optional seeder package
- 3rd and 4th harmonics available
- Full RS232 software control and LabVIEW™ drivers
Michael ILUZ
Main features:
- Custom wavelength available from UV to IR
- Ultrafast switching time (opened-opened) 500 μs
- Switching frequency range 0-500 Hz
- Laser power up to 200W
- Laser beam polarization independent
- Compact vertical design
- Compatable with femtosecond lasers
Application examples:
- Laser cutting
- Engraving
- Laser surgery systems
- Research
