Amplified photodetector PDA030 Miki Iluz Key Features Measured bandwidth >30MHz Wide spectral response 300 – 1060 nm High quantum efficiency 0.64 at 900 nm Isolated BNC connector to avoid ground loops via the chassis Standard M8 power connector accepting ±7V to ±15V SM1 (1.035”-40) internal thread optical tube mount M4/8-32 threaded holes for easy mounting Also available with an InGaAs photodiode for the wavelengths in the range 800 – 1700nm, details available on request.
AOKit Bio – Build any AO system for microscopy Johanna Taieb RECOMMENDED FOR – Wide field – Confocal – Multiphoton – Light sheet – STED and SIM microscopy, as well as FCS or optical tweezers KEY FEATURES – HASO4 First or HASO4 SWIR – MicAO soft – Wavekit SDK – MirAO 52e/52es or any compatible DM or phase modulator
AOKit Bio: Adaptive Optics Kit for Microscopy Miki Iluz Advantages of AOKit Bio: Choose your elements depending on your needs : AO loop can be integrated with different phase modulators, such as deformable mirrors or spatial light modulators (SLM) Doubles the number of detected photons Operate in both closed and open loop mode Save time implementing your AO set-up
Compact Fizeau wavemeter FZW600 Miki Iluz Key Features Absolute accuracy 600MHz Measurement precision 50MHz Up to 250 measurements/s Operation over 400-1100nm without recalibration Rapid on-device measurement, no host computer required! Integrated PID controller for wavelength stabilisation Interactive display for control and diagnostics Ethernet and USB interfaces Compact form-factor, 146 x 120 x 81 mm
Compact motorized laser beam expanders MEX Michael ILUZ Main features: Highest beam pointing stability (< 0,1 mrad) All-in-one design with integrated controller Two lenses simultaneous movement assuring no misfocus Absolute encoder (both lenses) Adjustment time <1s (all magnifications) Fused silica optical elements No homing after switching on/off Diffraction limited performance for all magnifications Application examples: Precise laser micromachining Life sciences Research
DIADEM SERIES – COMPACT HIGH-ENERGY FEMTOSECOND LASER Michael Iluz Key Features: High energy Compact Highly configurable pulses Air-cooled
Diode Laser Controller (DLC) Miki Iluz Key Features: Ultra-low noise current source Dual feedback servos Modulator driver Temperature controller Lock-in amplifier Piezo drivers Sweep ramp generator
Duetto 349 UV Series Laser – Single Frequency CW UV Laser Michael Iluz Key Features: Narrow Linewidth: ≤ 0.5 MHz High Power Stability: ≤ 2.0 % High Spectral Stability: ± 1.0 pm Designed for Integration
Duetto 532 Series Laser – Single Frequency CW DPSS Michael Iluz Key Features: Narrow Linewidth: ≤ 0.5 MHz High Power Stability: ≤ 2.0 % High Spectral Stability: ± 1.0 pm Excellent Beam Quality
Economical sub-picometre laser wavemeter MWM Miki Iluz Key Features: Accuracy ±0.001nm (1) Spectral resolution 0.02nm Wavelength readout resolution 100MHz (0.1pm) Any wavelength from 350nm to 1100nm available (2) Picowatt input sensitivity (3) Instantly identifies multimode input Rapid readout (4) CW or pulsed laser input PID feedback laser wavelength stabilisation (5) Ethernet and USB included as standard Compact, 165 x 85 x 70 mm Self-contained, built-in display, can run from battery
Fast servo controller FSC100 Michael Iluz Key Features: High-bandwidth PID or PI²D control All-analogue signal processing with propagation delay 40ns Parallel FAST and SLOW control loops Feedback to both current and piezo Flexible control of loop parameters High-bandwidth external modulation Internal ramp generator Two low-noise photodiode power supplies TTL control
Fixed ratio laser beam expanders FEX Michael ILUZ Main features: Divergence adjustment Galilean optical design UVFS optical elements Grease free mechanical design Wide wavelenght adoption – 200 nm to 2 μm Application examples: Laser materials processing Medical Research
HASO4 FIRST – Quality Wavefront Sensing in the 400-1100 nm Spectrum Johanna Taieb BEST FOR – Adaptive Optics applications for microscopy or UHIL – OEM applicaitons in optical metrology and beam diagnostics – AO for high-power laser optimization
High-power motorized beam expanders MEX-HP Michael ILUZ Main features: High power optical design (up to 200 W @ 1030 nm, 500 fs, 1 Mhz) No internal reflections on optical elements High beam pointing stability <0,2 mrad All-in-one design with integrated controller Two lens simultaneous movement assuring no misfocus Absolute encoder (both lenses) Fused silica optical elements Diffraction limited performance for all magnifications Application examples: Precise laser micromachining High power laser beam management Research
MENHIR-1550 SERIES Michael Iluz Key Features: Ultra-low noise Transform-limited pulses Compact industrial design Harsh environment resistant User friendly Turnkey system 24/7 operation All-in-one system
MicAO 3DSR – High Resolution 3D for SMLM Johanna Taieb BEST FOR – Photoactivation localization microscopy (PALM) – Stochastic optical reconstruction microscopy (STORM) – Single particle tracking (SPT) KEY FEATURES – Corrects aberrations and restores diffraction-limited PSF – Delivers best 2D and 3D localization precision for PALM/STORM imaging – Doubles the number of detected photons and improves localization precision – High temporal stability of the correction